The problem
There are usually four grids in play: the ceiling module, the lighting layout, the structural or façade grid, and the partition and furniture plan. Each is set by a different person for a different reason. When they don't line up, it shows. Partitions land mid-tile. Light runs stop short of a wall. Channels miss the window mullions they were meant to follow.
Why it keeps happening
Each grid is fixed at a different stage. The façade is set early, the ceiling module follows, and partitions often change late as the tenant plan develops. Off-the-shelf ceiling products force the layout to suit the product, not the building.
How A&L solves it
SEAM and REVEAL are extruded profiles cut to suit the building, not a fixed module. That means the channel layout can follow the grid that matters most. Channel runs can align with mullions, column lines or partition positions, then services set out from them. SEAM is available in 100, 125, 150, 200 and 300mm widths, so the channel can match the module or the scale of the space. REVEAL creates a deliberate recessed line that can absorb a change in grid and make it look planned. Because the channels are pre-coordinated, the setting-out is agreed on the drawing. The installer follows a fixed layout rather than working it out on site.
What to do next
Send us your RCP with the façade and partition plans. We will propose a channel setting-out that ties the grids together.
Protect your ceiling from drawing to delivery
UK-Manufactured, Pre-Coordinated SEAM and REVEAL channels from up to 100% recycled aluminium.
Send us your RCPRelated products
Related guides
All eight guides
- Late M&E information on the RCP
- Ceiling clashes found on site
- When ceiling grids don't align
- RCP revisions that don't reach site
- Value engineering and ceiling substitution
- Tolerances on aluminium ceiling profiles
- Ceiling compliance versus design intent
- Keeping control of the ceiling after novation