The problem
Imported profiles often vary from batch to batch. Widths drift, walls aren't true and lengths aren't square. On a single length it is hard to see. Over a 20m run, it shows as stepped joints, wandering lines and visible gaps. Installers end up packing, filing and adjusting on site to make lengths meet. That costs time and still rarely gives a clean result.
Why it keeps happening
Many imported profiles are folded from sheet rather than extruded, and are made to a looser tolerance to keep cost down. When a batch is out, there is no quick replacement and often no one accountable for the fault.
How A&L solves it
SEAM and REVEAL are UK-manufactured extruded profiles made to a +/- 1mm dimensional tolerance.
- Extruded, not folded. Each profile comes from the same die, so every length matches the last.
- Robust section. SEAM is made from 6063-T6 aluminium with a 2mm wall and a 30mm section depth, so it holds its line over long runs.
- UK-stocked. If a length is damaged on site, a replacement is not stuck in a shipping container.
- Accountable. We make it, we stock it and we stand behind it with a 10-year warranty.
The result is a ceiling where joints meet, lines run true and the installer spends time fixing, not adjusting.
What to do next
Read our guide on UK vs imported aluminium profiles, or ask us for a sample length to compare against your current specification.
Protect your ceiling from drawing to delivery
UK-Manufactured, Pre-Coordinated SEAM and REVEAL channels from up to 100% recycled aluminium.
Request a sample lengthRelated products
Related guides
All eight guides
- Late M&E information on the RCP
- Ceiling clashes found on site
- When ceiling grids don't align
- RCP revisions that don't reach site
- Value engineering and ceiling substitution
- Tolerances on aluminium ceiling profiles
- Ceiling compliance versus design intent
- Keeping control of the ceiling after novation